Self priming pump with errors

   Self suction pump use scope is very broad, such as ore, coal, environmental protection and other industries. Specially used for conveying corrosive solid slurry to eliminate. To avoid the artificial to exclude, a security, but if we used improperly it will cause damage to the self suction pump. The Changsha water pump factory, summed up several possible damage from using the method of suction pump.
   1, a pump and a water pipe on the water. This kind of situation will directly damage the self suction pump, and can not be used. Because the pump body should be put on the land, because it has the power, in the water not safe and easy to damage the pump body. So when the pump work to the slurry pump on the land.
   2, then is the mud pump motor and water pump body together, into the water, and the motor itself is to pump power, into the water after the water will be conductive and the motor burned, and even the motor directly. So we use the time to the motor on the surface of the water, but also the self suction pump fixed, to prevent the motor to pull into the water during the work time.
   3, self-priming pump inside filled with water directly to work. Such a situation would put the sealing shaft inside the burnt to the ground. This is a step must not forget, or self suction pump can not work.
   4, not in place a net - flow. If the intake did not place a network would cause the card phenomenon of pump, the water pipes are blocked, serious may also be due to burn out the pump. Because the net bar. There will be a lot of impurities into the water blocking damage the pump.
   5, install check after not self-priming pump. This may cause the packing leakage, resulting in insufficient flow pump. Because after the installation may not have to tighten the packing, lead to the occurrence of a leakage phenomenon. Our business is to filler compaction.
   The above is a few common and very easy to make a small mistake, we should correctly in accordance with the instructions for use and the use of steps to when using slurry pump, prevent the damage of the rotary cutting machine. Get it right and efficient work for us.